Smartwatch Sync application allows establishing a Bluetooth connection between android device and android smartwatch or Android Wear smartwatch.
When Smartwatch Sync is configured on both devices, SmartWatch Sync will display all notifications from your phone on your smartwatch screen.

Smartwatch Sync works with all china's watches

Instruction
(Full INSTRUCTION available on our site: smartwatchsync.icu)

1. Make sure Bluetooth is turned on. You should see the little Bluetooth symbol at the top of your phone’s screen. If you don’t, go into the settings to enable it.

2. Determine which pairing process your device employs. The process for pairing devices can vary. Sometimes, for example, it involves tapping a code into your phone. Other times, you can just physically touch your phone to the device you want to pair it with. Or in the case of the Bose SoundLink, you only have to hold down a button on the speaker to pair it with a phone.

If you’re not sure how to pair a device, refer to its user guide; you can usually find one by searching online.

3. Turn on discoverable mode. Let’s say you want to pair your phone with your car’s infotainment system so you can enjoy hands-free calling, texting, and navigation. First, go into your phone’s settings and tap on Bluetooth; doing so makes the phone visible to the car. Then depress the buttons on your car's infotainment system, usually on the steering wheel or center stack, to get it looking for the device.

Once it finds your phone, the car may ask for a numeric code you need to confirm or input on your phone. After you do so, the devices should be paired. Keep in mind your phone or your car may only stay in discoverable mode for a few minutes; if you take too long, you’ll need to start over.

4. Make sure the two devices are in close enough proximity to one another. While you wouldn’t think someone might try to pair a phone with a keyboard if the two weren’t sitting right next to each other, it’s probably worth noting that you should make sure any devices you're trying to pair are within five feet of one other.

5. Power the devices off and back on. A soft reset sometimes can resolve an issue. With phones, an easy way to do this is by going into and out of airplane mode.

6. Power down likely interferers. Say that faithful Bluetooth speaker usually connects to your partner's smartphone instead of yours. If you're having trouble pairing your phone with the speaker, it could be because the speaker is trying to activate its usual connection. Some older devices are very simple. They just try to connect with the last thing they paired with. If a Bluetooth device was previously paired with something else, turn off that other gadget.

7. Charge up both devices you're trying to pair. Some devices have smart power management that may turn off Bluetooth if the battery level is too low. If your phone isn't pairing, make sure it and the device you're trying to pair with have enough juice.

8. Delete a device from a phone and rediscover it. If your phone sees a device but isn’t receiving data from it, sometimes it helps to start from scratch. In iOS settings, you can remove a device by tapping on its name and then Forget this Device. In Android settings, tap on a device’s name, then Unpair. After removing a device, start at step 1 on this list.

In PRO version:
1. No ads!
2. Better bt connection.
3. Ability to turn on/off notifications for specific applications. Set SmartWatch to only important notifications!