ESP8266 Loader - (Blynk Uploader)
도구 | Bluino Electronics
5억명 이상의 게이머가 신뢰하는 안드로이드 게임 플랫폼 BlueStacks으로 PC에서 플레이하세요.
Play ESP8266 Loader - (Blynk Uploader) on PC
A tool runs on Android platform to create an IoT project easy.
Makes it easy to upload binary file (result of compiled Arduino IDE) to any Expressif ESP8266 development board via USB OTG or WiFi (OTA).
Features:
★ Upload/Flash bianry file via USB OTG
★ Upload/Flash bianry file via WiFi (OTA)
★ Support any USB chip: CDC/ACM, FTDI, PL2303, CH34X and CP210X
★ Serial Monitor for debuging
★ Change the Blynk token, SSID & password automatically durring upload
★ No Ads (Pro version)
★ Access to Google Drive storage (Pro version)
★ Multiple upload widgets button (Pro version)
Note:
- Your device must support USB Host OTG, otherwise the program will not work
- Use good quality OTG adapter/cable, otherwise the uploading failure
- If you get error: "Failed download. Check network connection." You can try to download the required file manually from this link:
https://github.com/bluino/ESP8266Loader and https://github.com/bluino/ESP8266Loader_extra
then extract it to internal storage, so that you will have the /sdcard/ESP8266Loader folder.
Makes it easy to upload binary file (result of compiled Arduino IDE) to any Expressif ESP8266 development board via USB OTG or WiFi (OTA).
Features:
★ Upload/Flash bianry file via USB OTG
★ Upload/Flash bianry file via WiFi (OTA)
★ Support any USB chip: CDC/ACM, FTDI, PL2303, CH34X and CP210X
★ Serial Monitor for debuging
★ Change the Blynk token, SSID & password automatically durring upload
★ No Ads (Pro version)
★ Access to Google Drive storage (Pro version)
★ Multiple upload widgets button (Pro version)
Note:
- Your device must support USB Host OTG, otherwise the program will not work
- Use good quality OTG adapter/cable, otherwise the uploading failure
- If you get error: "Failed download. Check network connection." You can try to download the required file manually from this link:
https://github.com/bluino/ESP8266Loader and https://github.com/bluino/ESP8266Loader_extra
then extract it to internal storage, so that you will have the /sdcard/ESP8266Loader folder.
PC에서 ESP8266 Loader - (Blynk Uploader) 플레이해보세요.
-
BlueStacks 다운로드하고 설치
-
Google Play 스토어에 로그인 하기(나중에 진행가능)
-
오른쪽 상단 코너에 ESP8266 Loader - (Blynk Uploader) 검색
-
검색 결과 중 ESP8266 Loader - (Blynk Uploader) 선택하여 설치
-
구글 로그인 진행(만약 2단계를 지나갔을 경우) 후 ESP8266 Loader - (Blynk Uploader) 설치
-
메인 홈화면에서 ESP8266 Loader - (Blynk Uploader) 선택하여 실행