Jetting for Honda CR dirt bike
Sports | ISEnet
5억명 이상의 게이머가 신뢰하는 안드로이드 게임 플랫폼 BlueStacks으로 PC에서 플레이하세요.
Play Jetting for Honda CR dirt bike on PC
Jetting for Honda CR will help you configure the carb of your 2 strokes Honda CR dirt bike (CR 80, CR 85, CR 125, CR 250, CR 500) to improve its performance with no need of repair manual or owner's manual. Using weather conditions and your engine / carb configuration, the app will show you a recommendation about jetting to your specific carburetor, so it can be useful to get a spot-on jetting configuration and adapt it to weather changes.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user must enter the altitude and weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown. These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you must set in this screen the information about the engine, that is, the year, model (CR80, CR85, CR125, CR250, CR500) and carburator (Keihin, Mikuni). Besides, you can enter the oil mix ratio that you're using.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application can manage different measure units: meters and feet for altitude, ºC and ºF for temperatures, mb, hPa, inHg, mmHg for pressure.
The app includes the following Honda CR two stroke, off-road motorbikes:
- CR80: from 1995 to 2002.
- CR85: from 2003 to 2007.
- CR125: from 1986 to 2007.
- CR250: from 1986 to 2007.
- CR500: from 1986 to 2001.
If you click in "More from developer" you can find the other jetting apps for 2 strokes & 4 strokes motocross, SX, MX, enduro, supercross, off-road race motorcycles: Yamaha YZ, Suzuki RM, Honda CRF, Kawasaki KX, KTM SX, KTM XC, KTM EXC.
The app is valid for both PRO or beginners dirtriders.
PERMISSIONS:
The application needs the following permissions:
- Your location: it lets the application get the position and the altitude using the GPS to know which is the nearest weather station.
- Storage: it's used for storing the configuration preferences.
- Network communication: it's used for invoke the external service which provides the current weather conditions
- Phone calls (read phone state and identity): it allows to get the system identifier in order to validate the license status of the installed application.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user must enter the altitude and weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown. These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you must set in this screen the information about the engine, that is, the year, model (CR80, CR85, CR125, CR250, CR500) and carburator (Keihin, Mikuni). Besides, you can enter the oil mix ratio that you're using.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application can manage different measure units: meters and feet for altitude, ºC and ºF for temperatures, mb, hPa, inHg, mmHg for pressure.
The app includes the following Honda CR two stroke, off-road motorbikes:
- CR80: from 1995 to 2002.
- CR85: from 2003 to 2007.
- CR125: from 1986 to 2007.
- CR250: from 1986 to 2007.
- CR500: from 1986 to 2001.
If you click in "More from developer" you can find the other jetting apps for 2 strokes & 4 strokes motocross, SX, MX, enduro, supercross, off-road race motorcycles: Yamaha YZ, Suzuki RM, Honda CRF, Kawasaki KX, KTM SX, KTM XC, KTM EXC.
The app is valid for both PRO or beginners dirtriders.
PERMISSIONS:
The application needs the following permissions:
- Your location: it lets the application get the position and the altitude using the GPS to know which is the nearest weather station.
- Storage: it's used for storing the configuration preferences.
- Network communication: it's used for invoke the external service which provides the current weather conditions
- Phone calls (read phone state and identity): it allows to get the system identifier in order to validate the license status of the installed application.
PC에서 Jetting for Honda CR dirt bike 플레이해보세요.
-
BlueStacks 다운로드하고 설치
-
Google Play 스토어에 로그인 하기(나중에 진행가능)
-
오른쪽 상단 코너에 Jetting for Honda CR dirt bike 검색
-
검색 결과 중 Jetting for Honda CR dirt bike 선택하여 설치
-
구글 로그인 진행(만약 2단계를 지나갔을 경우) 후 Jetting for Honda CR dirt bike 설치
-
메인 홈화면에서 Jetting for Honda CR dirt bike 선택하여 실행