このページには広告が含まれます
DPF Monitor -Fiat & Alfa Romeo

DPF Monitor -Fiat & Alfa Romeo

None | kapron-ap

BlueStacksを使ってPCでプレイ - 5憶以上のユーザーが愛用している高機能Androidゲーミングプラットフォーム

ページ更新日: 2022/01/31

Play DPF Monitor -Fiat & Alfa Romeo on PC

Control your diesel engine condition by monitoring DPF diesel particulate filter clog level and regenerations history. Easily check if the filter is currently in the regeneration process.

In modern diesel engines any car faults are impacting DPF filter condition. Faulty injectors, cylinder compression issues, blow-by circuit problems, engine seals worn and many others.

Controlling DPF state gives the best overview of the car condition and performance. It is great tool when you are buying used car, you can instantly check car engine state and confirm car mileage.

To use this application you need elm327 Bluetooth/WiFi diagnostic interface and connect it to the OBD connector in your car.
To read DPF data, the program must connect to the engine via the CAN bus, so please make sure that the interface supports the ISO 14230-4 KPW protocol (fast init, 10.4Kbaud). We recommend Vgate iCar, OBDLink and Konnwei Bluetooth/WiFi interfaces.

Readings available:

- Current dpf status and clog level
- Current dpf temperature
- Current engine temperature
- Current differential pressure - another way to see dpf filter clogging
- Regeneration progress

- Distance from last DPF regeneration
- Average distance for last 5 regenerations stored in car engine control unit - ecu
- Average duration of last 5 regenerations stored in ecu
- Average temperature of last 5 regenerations stored in ecu
- Regenerations interrupted by key OFF (on some cars)

- Mileage at last oil change
- Distance from last oil change
- Engine oil degradation level

The application supports the following cars:

Alfa Romeo
- 159/Brera/Spider 1.9 2.4 2.0
- Giulietta 1.6 2.0
- Giulia 2.2
- Stelvio 2.2
- MiTo 1.3 1.6

Fiat
- 500 1.3 1.6
- 500L, 500X 1.3 1.6 2.0
- Panda 1.3 1.9
- Bravo 1.6 1.9 2.0
- Croma 1.9 2.4
- Doblo 1.3 1.6 1.9 2.0
- Ducato 2.0, 2.2, 2.3, 3.0
- Idea 1.6
- Linea 1.3 1.6
- Sedici 1.9 2.0
- Stilo 1.9
- Ducato 2.3
- Egea 1.6
- Fiorino 1.3
- Punto 1.3 1.9
- Punto Evo 1.3, 1.6
- Grande Punto 1.3 1.6 1.9
- Idea 1.3 1.6 1.9
- Qubo 1.3
- Strada 1.3
- Tipo 1.3 1.6, 2.0
- Toro 2.0
- Freemont 2.0

Lancia
- Delta 1.6 1.9 2.0
- Musa 1.3 1.6 1.9
- Thesis 2.4
- Delta 2014 1.6 2.0,
- Ypsilon 1.3,

Chrysler
- Delta 1.6 2.0
- Ypsilon 1.3,

Dodge
- Journey 2.0
- Dodge Neon 1.3 1.6,

Jeep
- Cherokee 2.0
- Compass 1.6, 2.0
- Renegade 1.6, 2.0

Suzuki SX4 1.9 2.0 DDiS

We did our best to ensure that this application is safe and not interfere with your car electronics, but still you are using it at your own risk. We recommend not to use it while driving. Authors are not responsible for any injuries made to you or any damage made to your car.

DPF Monitor -Fiat & Alfa RomeoをPCでプレイ

  • BlueStacksをダウンロードしてPCにインストールします。

  • GoogleにサインインしてGoogle Play ストアにアクセスします。(こちらの操作は後で行っても問題ありません)

  • 右上の検索バーにDPF Monitor -Fiat & Alfa Romeoを入力して検索します。

  • クリックして検索結果からDPF Monitor -Fiat & Alfa Romeoをインストールします。

  • Googleサインインを完了してDPF Monitor -Fiat & Alfa Romeoをインストールします。※手順2を飛ばしていた場合

  • ホーム画面にてDPF Monitor -Fiat & Alfa Romeoのアイコンをクリックしてアプリを起動します。

動画の視聴