RP3 Rowing is a free application designed for the RP3 Rowing Ergo meter to run on newer Android devices. Once connected, it provides an advanced training tool that any rower or paddler can use to get real-time stroke rate, speed, distance, heart rate and other data.

The big advantage is the real time Force Curve, which gives you a detailed feedback over your rowing stroke. Every stroke of every workout is recorded and saved for later review. Additional it can upload your workouts to the RP3
Rowing Online Logbook (in a future version). You can build your own workout scheme based on
time, distance, strokes and heart rate.

Furthermore the data can be adjusted for boat type and weight to get the right
output, which can be compared with the boat you are rowing. This data is
accurate within 0,5% to the times on water.

With every stroke you have a choice out of 20 different data features to display.
Just tap a tile and you will get a list of all the possible data, select the data you
want and it will be displayed. In this way you can build your own screen.

The workout setting is easily done by adding the different training goals you like
to go for. Set a number and hit the ‘+’ button and it will be added in the workout
scheme. When you start rowing the programmed workout will be shown in the
top of the screen and a pacer and a countdown will tell you how much to do.

Enjoy all future upgrades.

* Displays your rowing data in real time.
* Offers a choice of following data:
- Stroke number
- Power per stroke
- Average power per stroke
- Stroke rate
- Time
- Stroke length
- Distance
- Distance / stroke
- Est. 500m time
- Energy / stroke
- Energy sum
- Pulse
- Work per pulse
- Peak force
- Peak force position
- Peak force position relative to stroke length
- Drive time
- Recover time
- Stroke time
- Drive : recover ratio
- Boat speed
- K value (resistance factor)
*Logs all your rowing workouts, including intervals, splits and heart rate information.
*Uploads workouts directly to the RP3 Rowing Online Logbook (in a future version)
*Displays weight-adjusted scores.
*Allow you to view different units on your monitor and device (for example, you can display watts on the device while viewing average pace on the monitor).

Requirements:
*RP3 Rower (from model RP3 - 2010)
*Eken 7” tablet standard on RP3S from august 2014
*Android RP3 cable (available from RP3 Rowing), part number 14001 for €10,00.
*USB Cable and a USB OTG (On-The_Go) Adapter (available from Amazon, Monoprice and other online vendors). RP3 part number 14002 for € 12,95
*A compatible Android device with a firmware version that supports USB Host mode. To test compatibility, use the "USB Host Diagnostics" to pass all tests, then RP3 Rowing for Android will work.

Android versions 4+ support USB Host mode.

Please note that RP3 Rowing cannot guarantee compatibility with any particular device. Manufactures frequently make changes that may disable RP3 Rowing, or you may have an earlier version than we tested. Some devices may require additional steps or special hardware to make it work, and some will never work.